Introduction
The AMS Steeley vending machine combines robust stainless steel construction with modern vending technology. Ideal for both indoor and outdoor use, it supports various product types with configurable trays and offers energy-efficient operation for long-term reliability.
Specifications
| Specification | Details |
| Dimensions | Height: 72”, Width: 39”, Depth: 34” |
| Weight | ~900 lbs. |
| Power Supply | 115V or 230V, 50/60 Hz |
| Refrigeration | Factory-sealed R290 refrigerant unit |
| Material | Stainless steel construction |
| Selections | Configurable trays for snacks, drinks, and other items |
Key Features
- Durable Stainless Steel Construction: Designed to withstand harsh environments and heavy use.
- Energy-Efficient Refrigeration: Keeps products at optimal temperatures with minimal power usage.
- Customizable Trays: Adjustable for various product sizes and types.
- Advanced Diagnostics: Built-in error monitoring for easy troubleshooting.
- Weather-Resistant Design: Suitable for outdoor use when installed in protected areas.
Installation
Placement Guidelines
- Install the machine on a level, stable surface capable of supporting at least 1,200 lbs.
- Ensure proper clearance for ventilation:
- For outdoor installations, place the machine under a canopy or protected area to shield it from direct sunlight and rain.
Electrical Connection
- Plug into a grounded outlet matching the voltage requirements (115V or 230V).
- Use a dedicated circuit to prevent power fluctuations.
Initial Calibration
- Power on the machine.
- Access the service menu via the VMC (Vending Machine Controller).
- Calibrate sensors, motors, and refrigeration settings.
Operation
Loading Products
- Unlock and open the front door using the service key.
- Pull out trays to access the product slots.
- Load products into the coil spirals, ensuring proper alignment to avoid vending jams.
- Perform a test vend for each selection to confirm functionality.
Programming Prices
- Enter the service menu using the VMC control panel.
- Navigate to the Price Setup option.
- Set individual prices for each selection or apply bulk pricing.
- Save the configuration before exiting.
Customer Interaction
- Customers use the keypad to input product selections.
- The LED display provides clear instructions and pricing information.
Maintenance
Daily Maintenance
- Wipe the exterior panels and stainless steel surfaces with a damp cloth.
- Inspect the coin mechanism and bill acceptor for debris or jams.
Weekly Maintenance
- Clean the condenser coils and air vents to maintain refrigeration efficiency.
- Check trays and motors for alignment and proper operation.
Monthly Maintenance
- Perform a full diagnostic test via the VMC control panel.
- Inspect wiring and replace worn or damaged components.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust product alignment or clear the jam. |
| Machine not cooling | Dirty condenser or faulty fan | Clean the condenser or replace the fan. |
| Display not functioning | Loose wiring or power issue | Check connections and verify power supply. |
| Incorrect change dispensed | Coin mechanism error | Inspect, reset, or replace the coin mechanism. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.
For immediate support, contact AMS Customer Support using the details above.