Introduction
The AMS SENSIT II FV vending machine uses advanced product detection technology to ensure seamless operation and reliable dispensing. With customizable trays, energy-efficient refrigeration, and easy-to-use programming, it caters to a variety of vending needs.
Specifications
| Feature | Details |
| Dimensions | Height: 72", Width: 39", Depth: 34" |
| Weight | ~850 lbs. |
| Power Supply | 115V or 230V, 50/60 Hz |
| Refrigeration | R290 sealed refrigeration unit |
| Technology | SENSIT product detection system |
| Selections | Configurable for snacks and beverages |
Key Features
- SENSIT Product Detection: Ensures reliable vending by detecting product drops.
- Energy-Efficient Refrigeration: Maintains optimal product temperatures while conserving energy.
- Customizable Tray Configurations: Accommodates a wide range of product sizes.
- Advanced Control System: Offers programming for pricing, product tracking, and diagnostics.
Installation
Placement Guidelines
- Position the machine on a stable, level surface with proper clearance:
- Avoid direct sunlight or high-humidity environments.
Electrical Setup
- Use a grounded outlet matching the machine's voltage requirements.
- Avoid shared circuits or extension cords.
Initial Setup
- Power on the machine and access the service menu.
- Calibrate SENSIT sensors to ensure accurate product detection.
- Perform a diagnostic test to verify system functionality.
Operation
Loading Products
- Unlock and open the machine door.
- Pull out trays to access product slots.
- Load snacks and beverages into coils or columns, ensuring proper alignment for smooth vending.
- Test vend each selection to confirm functionality.
Programming Prices
- Enter the service menu via the VMC control panel.
- Navigate to Price Setup.
- Assign prices for individual selections or set a global price.
- Save settings before exiting.
Customer Interaction
- Customers select products using a keypad.
- The LED display provides instructions and transaction updates.
Maintenance
Daily Maintenance
- Clean the glass and exterior surfaces with a non-abrasive cloth.
- Inspect the coin and bill acceptors for jams or debris.
Weekly Maintenance
- Clean the condenser coils to maintain refrigeration performance.
- Test the SENSIT sensors for accuracy and recalibrate if needed.
Monthly Maintenance
- Inspect wiring and connectors for wear.
- Perform a full system diagnostic via the control panel.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust the product or clear the jam. |
| Machine not cooling | Dirty condenser or fan failure | Clean the condenser or replace the fan. |
| SENSIT not detecting product | Sensor misalignment | Recalibrate the SENSIT system. |
| Incorrect change dispensed | Coin mechanism error | Reset or replace the coin mechanism. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.
For immediate assistance, contact AMS Customer Support using the details above.