Table of Contents
- Overview
- Key Specifications
- Installation Guidelines
- Loading Products
- Refrigeration System
- Service Modes and Programming
- Troubleshooting and Maintenance
- Common Errors
1. Overview
The EnVision series offers modern vending solutions, integrating user-friendly operations with ADA-compliant designs. Built for indoor use, these machines ensure a consistent and secure vending experience.
2. Key Specifications
| Specification | 4-Wide | 5-Wide Ambient | 5-Wide Refrigerated |
| Height | 72 in | 72 in | 72 in |
| Width | 35 in | 39 in | 39 in |
| Depth | 37 in | 37 in | 37 in |
| Voltage (Domestic) | 115V | 115V | 115V |
| Voltage (International) | 230V | 230V | 230V |
| Refrigerant | N/A | N/A | R290 (2.65 oz) |
3. Installation Guidelines
- Placement: Install only in climate-controlled environments (50°F–90°F with ≤45% relative humidity).
- Clearance: Maintain a minimum of 6 inches from walls for adequate airflow.
- Leveling: Use the provided leveling feet to ensure proper alignment and door functionality.
4. Loading Products
Snack Trays:
- Tilt the tray forward by releasing the latch on the tray’s right side.
- Align products between coil spirals. Ensure the product size matches the coil and column dimensions.
Beverage Columns:
- Load bottles or cans into the auger-driven columns.
- Always position labels facing outward for better visibility.
5. Refrigeration System
Refrigerated models are equipped with a modular cooling system.
- Components: Compressor, condenser, fans, evaporator, and duct.
- Maintenance: Clean the condenser every two weeks to ensure efficient operation. Use a vacuum or soft brush to avoid damaging the fins.
- Operation: Ensure the door is closed fully; the evaporator fan will activate when the system is operational.
6. Service Modes and Programming
Access the Service Mode by pressing the Menu button on the VMC board.
Key Programming Options:
- Price Setup: Adjust prices for all selections or specific rows.
- Sales Tracking: Monitor sales data, including cash and card transactions.
- Custom Settings: Configure language, temperature, and advanced sale options like multi-vending or free vend mode.
7. Troubleshooting and Maintenance
Common Maintenance Tasks:
- Inspect and clean coin and bill paths regularly.
- Test product dispensing by entering diagnostic mode and selecting individual motors.
Error Codes Table:
| Error Code | Description | Solution |
| E01 | Motor malfunction | Check motor and reset. |
| E02 | Coin jam detected | Clear the coin path. |
8. Common Errors
Issue: Machine not dispensing products.Solution:
- Check product alignment and ensure trays are locked into place.
- Use the diagnostics mode to test the selection motor.
Issue: Cooling system not functioning.Solution:
- Verify power connection to the refrigeration module.
- Clean the condenser for unobstructed airflow.
For detailed instructions, visit Seaga Manuals.For immediate support, contact [email protected] or call 1-815-297-9500.