Introduction
The AMS Classic Snack Vendor is a glass-front vending machine designed for snack products. It features models 35” and 39” wide, accommodating various product types with customizable trays and advanced features for ease of operation and maintenance.
Specifications
Physical Dimensions:
| Model | Width | Height | Depth | Weight |
| 35” Model | 35” | 72” | 34” | 850 lbs. |
| 39” Model | 39” | 72” | 34” | 877 lbs. |
Electrical Requirements:
- Voltage: 115V or 230V
- Frequency: 50/60 Hz
Product Capacity:
- Up to 6 trays with a maximum of 24 selections.
Installation
Unpacking and Inspection:
- Inspect for shipping damages and report any issues immediately.
- Remove packing materials carefully to avoid damaging components.
Placement:
- Ensure the machine is installed on a level surface to avoid operational issues.
- Leave at least 2 inches of clearance at the rear for ventilation.
Electrical Connection:
- Connect to a dedicated 115V or 230V outlet with proper grounding.
Operation
Loading Products:
- Open the vending machine door using the T-handle lock.
- Pull trays forward using the release latch.
- Load products carefully between the helix spirals, ensuring proper alignment to avoid jams.
- Push trays back into position and close the door securely.
Programming Prices:
- Access the controller menu via the service button.
- Use the keypad to set prices for individual selections or entire rows.
Testing Vends:
- Use the service menu to perform a test vend for each selection.
Maintenance
Daily Checks:
- Clean the exterior glass and display panel with a damp, lint-free cloth.
- Empty the coin box and inspect the bill validator for jams.
Monthly Maintenance:
- Inspect all trays and motors for wear or damage.
- Vacuum the condenser coils for optimal cooling performance.
Chiller Option:
- For refrigerated models, ensure the temperature sensor and refrigeration components are working correctly. Regular cleaning of the evaporator and condenser is essential.
Troubleshooting
| Issue | Possible Cause | Solution |
| Machine not powering on | Faulty electrical connection | Check power outlet and cord connections. |
| Products not vending | Misaligned items or helix jam | Reposition items and test motor functionality. |
| Inconsistent cooling | Dirty condenser or fan failure | Clean condenser and check fan operation. |
For more information, contact AMS support:
- Email: [email protected]
- Phone: 304.725.6921
For complete documentation, visit: AMS Manuals
For immediate assistance, contact [email protected] or call 1-815-297-9500.